differental problems???

[jkoepke]

hey i just want to thank all you guys for all the help.my tractor is about 100 miles away so i dont get much time to go up to play with it thats why its taking so long to work on it.It looked like i could get a little gear puller on that support to help pull it off i tapped lightly with a small hammer and it was a little use just didnt want to keep going in case i was going about it wrong. There was room to cut the bolts off like you mentioned i will do that if i dont have any luck.do you think small gear puller is a good idea or not thank all you guys for the help, i will let you know what i find

[hotratz]

Clean around the hanger and make sure somebody didn't weld the hangers to the track frame.

[jkoepke]

hey guys got my tractor final torn apart today it was the right hand drive axle that broke. Got a new one on the way from Chris. The ring and pinion are in near perfect shape as well as the bearings. When i put it back together should i repack the bearings or are they made to just run in oil.The axle had been broke once before and someone turned it down and put a sleeve on it drilled and pinned it and it broke where they drilled it. thanks again for all the help

[hotratz]

The oil in the final housing lubricates them.