Year of HG-68

Started by Mike, September 18, 2005, 03:16:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Mike

September 18, 2005, 03:16:08 AM Last Edit: January 01, 1970, 12:00:00 AM by Mike
What year did they put 2 three speeds in? Was this an option? We have an HG-68 and we are trying to find the year. Plate is missing. Where else can we look?? We are ultimately looking to get a manual or a wiring diagram since we are having some slight electrical problems.

Blake Malkamaki

#1
September 18, 2005, 04:08:23 PM Last Edit: January 01, 1970, 12:00:00 AM by Blake
MOVED TO HG, OC-3, OC-4 & General forum.

PLEASE READ RULES IN "Cletrac Website / Forum Discussion": Post your questions, concerns, hints, and suggestions for the Cletrac Website and Discussion Forum. Please NO TRACTOR discussion here.
My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.

John Schwiebert

#2
September 18, 2005, 10:53:08 PM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
Yes the second transmission was an option. Two things to check. One on each side of the engine. On the left side near the top of the block Hercules stamped the model and serial number of the engine. On the right side of the block kind of behind the mag Hercules put the casting date. Start there. Also look ar the right frame rail very closely. Before a certain date the serial number was attached to the frame rail After that it was attached to the bellhousing so look for 3 faster holes on the right side of the bell housing or four in the frame rails. What is you electrical problem? Start there.
John Schwiebert
Print
Go Up Pages1
User actions