which spark plugs for the ixk3 in my hg

Started by tim, December 17, 2005, 05:35:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tim

is there a spark plug for the ixk3 engine that is better than the other for this application. i was thinking autolite but im not sure of the plug number.  it has the bigger base on it.   thanks,  tim

Blake Malkamaki

#1
Personally I would stay away from Champions as they are not what they once were. I've had them foul out just from a little carbon on the porcelain. When replaced with A-C, Autolites, or Motorcrafts the problem was solved.

Blake
My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.

walter hudson

#2
i agree with Blake ,champion plugs are not the quality that they use to be .if you are gas fouling the plugs make sure your carb. and magneto are in good condition ,also if your engine has a place for a thermostat ,put one in it ,that will help.the higher heat range champion plugs are w-18 and w-20 if you want to cross them to another brand . i can't remember the autolite #,but i will try to find it.
                                                    walter

walter hudson

#3
the autolite # is   3076, i believe that if you cross w14,w18,or w20 you will get this part# since popularity determines production a lot of the different heat ranges have been dropped.
                               walter