ware loader

Started by klinebauer, March 12, 2004, 12:31:41 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

klinebauer

March 12, 2004, 12:31:41 AM Last Edit: January 01, 1970, 12:00:00 AM by klinebauer
I just recently purchaced a ware loader for my HG.  Does anyone know what kind of hydraulic pump was used on this loader?  Where can I get seals and o rings?;)

Blake Malkamaki

#1
March 12, 2004, 01:00:34 AM Last Edit: January 01, 1970, 12:00:00 AM by Blake
Moving over to HG.....

John S. should know this hyrdaulic question.
My gramps Howard van Driest was Experimental Engineer at Cletrac and Oliver Corporation. After the plant closed, he and my uncle started an excavating business, initially using Cletrac and Oliver Crawler tractors. Please help Support This Site and give your business exposure by buying a business card sized ad.

Ray

#2
March 12, 2004, 12:23:07 PM Last Edit: January 01, 1970, 12:00:00 AM by Ray
The ware loaders usually used HYDRECO pumps, most seals are hard to find for these pumps. Do you have a picture or numbers of the pump as they used several different models.
My comments are not meant to discourage other members from posting, I encourage everyone to voice their opinion.
VENDOR: Zimmerman Oliver-Cletrac
Parts for Oliver and Cletrac Crawlers is our specialty.
www.olivercletrac.com

John Schwiebert

#3
March 12, 2004, 09:57:38 PM Last Edit: January 01, 1970, 12:00:00 AM by John Schwiebert
Hydreco reorganized a few years ago > My group was working with them on a piston pump, but things did not go well and they are no more. Normally if the front seal of a gear pump leaks, one can start thinking of excess internal pump wear and it might be best to get a new pump. Also if you do not have a return line filter, now is the time to think about that. Send me a U2U with a phone number and I will talk to you. I may even have a pump. John
John Schwiebert

Nick C.

#4
March 25, 2004, 03:32:16 AM Last Edit: January 01, 1970, 12:00:00 AM by Nick C.
John, what return line filter would you recommend adding to a Ware loader pump setup?  Would you use an inline filter?  What size and type?
Print
Go Up Pages1
User actions