Final Drive Casting for OC-3 needed

Started by BillGuise, March 28, 2004, 12:17:01 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

BillGuise

March 28, 2004, 12:17:01 AM Last Edit: January 01, 1970, 12:00:00 AM by BillGuise
Recently acquired a OC-3 and have been working from the top down. Everything is now in good shape, it has been field tested, however in checking the final drive oil, I discovered the casting was broken off at the filler level. Am on the hunt for a replacement casting, would like to find one out west-WA, OR, BC, ID, but dearly need and right now I have no options. Even a broken one with the bottom on it would be an option as mine could be welded with the new part. Any ideas appreciated.

wolcott@dmcom.net

#1
April 03, 2004, 01:24:17 AM Last Edit: January 01, 1970, 12:00:00 AM by wolcott@dmcom.net
hat model HG? 42", 68"?
I have both 68 final drive castings and innards

BillGuise

#2
April 03, 2004, 06:27:27 AM Last Edit: January 01, 1970, 12:00:00 AM by BillGuise
Thanks for the reply.  I did go to the source, Zimmerman, and he has one on it's way to Kent, WA.  Thanks for your reply on the issue, Bill
Print
Go Up Pages1
User actions