Messages

If it is a hg 42 motor it should be a hercules ixb engine the made about 18 hp. I had to sleeve my block because the previous owner ran the machine into the dirt. Sleeves where $125 each installed. I spend something around $1800 to rebuild my engine. Yours may not be as bad. Parts are available.  Where are you located I may be interested in a dozer blade set up. I am in Northern New Jersey. Good luck with what ever you decide. Jeremy

I looked at 3 oliver crawlers the other day. I was wondering if someone could help out with a fair price for them.

#1 Oliver OC3- 42 IND
Ware 3WI loader (bucket and dozer blade)
Transco Aux Trans
Engine professionally rebuilt
Dozer disassemble sand blasted and painted
Needs pins and bushings

#2 Oliver OC 46 Spot Turn
Ware loader
4 Cyl gas engine
Engine professionally rebuilt
Dozer disassemble sand blasted and painted

#3 Oliver OC 4 IND
Has dozer blade setup (anderson or ware??)
3 Cyl gas engine
Has shuttle shift
Engine professionally rebuilt
Dozer disassemble sand blasted and painted

thanks for all your help

Looking for a source to purchase a bendix gear/assembly for my delco remy starter on my OC3. Can anyone help me? thanks Jeremy

I have a OC3 w/ 3WI loader(in parts) with a TSX403 and I purchased a OC3 crawler  a month ago and notice it also has a bendix carb. I have never seen one in any of the pictures of oc3s or hgs I was thinking it was just something a farmer had around and put it on. I have 2 NOS TSX 455 carbs I hope work in its place. let me know if you find anything else out about the bendix carbs thanks Jeremy

I am looking for a dozer blade setup for my OC3-42 I just bought. I would also like any info on putting a pickup truck snowblade setup on the dozer I am looking to use it for snow removal. Any info would be great.
thanks Jeremy

zimmerman in PA has almost all parts for OC3s new and used I also have a  new old stock carb which I got in a lot. if yo are interested let me know. thanks Jeremy good luck with your OC3

I am working on a 1954? OC 42 IND w/Ware Loader and having trouble getting the ring gear off one side. I got the trunnion off and can't seem to get to ring gear off. Any ideas

thanks Jeremy

NW New Jersey area


brand new carb for sale
some spare parts

[UPDATEI talked to zimmerman and he sells new mounts. He said you punch out rivets and bolt new ones right in. 717-738-2573]

Has anyone had to replace the front engine mounts? thanks for the info

UPDATE
I talked to zimmerman and he sells new mounts. He said you punch out rivets and bolt new ones right in. 717-738-2573

if your looking to sell a drive shaft I would be interested in one. thanks let me know. 1953 OC3 w/ ware loader Jeremy

I dont know if he will ship to UK but you can try Zimmerman. www.olivercletrac.com good luck Jeremy

I took my engine out this week. I have the bucket off and raised then boom up over my head with a chain hoist. make sure you work the lever when raising the boom. I just used vise-grips to keep the boom handle locked in the raised position. The only problem I had was broken bolts in the bell housing wouldn't allow the engine to lift up. Other than that I swung the engine right out, Its a little tricky with a cherry picker because of the tracks.
I took the head off and the pistons are stamped .060 so my block my be trash. I'm new at this and just bought it a month ago.

1952 OC3 w/Ware 3WI loader
Jeremy
NJ

does anyone know where to purchase a clutch kit for an oc3 thanks

Hey guys, let me say first cool site. I've purchase an oc3 recently and was glad to find this site. I was unsure about buying it until I searched around on the internet and ended up here. I got a 1950(s)? OC3 with Ware loader. I need some help and was thinking maybe you guys had some spare parts around that you'd be willing to sell. I've talk to all the cletrac guys like Zimmerman already but I'm tring  to save  as much money since I'm only 24 and money is limited. well whos money isn't. I'm looking for air intake assembly with the tube that goes to carb. also hood and grill guard,rear lug covers. all help and pointers are greatly appreciated thanks.
Jeremy
New Jersey